
Drainage infrastructure designed on paper and
built to perform in the field.
Water is one of the greatest threats to pavements, subgrades and developed sites. A successful drainage system must collect runoff, carry it through properly installed structures and piping, discharge it as designed and work with the surrounding surface grades.
HMA Contracting installs and improves commercial drainage and stormwater systems for businesses, institutions, schools, municipalities, developers and general contractors throughout Albany and New York’s Capital District. Our excavation, grading, sitework and paving capabilities help coordinate the complete path of water—from the finished surface to the underground system and final restoration.
Commercial drainage capabilities
- Storm-drain piping and structures
- Catch basins, drain inlets and manholes
- Connections and system extensions
- Detention or retention-system construction within project scope
- Underdrain and subsurface drainage
- Drainage-related excavation and backfill
- Surface grading and swales
- Pavement removal and restoration associated with drainage work
Why surface grades and underground systems must agree
A catch basin cannot collect water that never reaches it. Conversely, accurate pavement grades cannot compensate for an obstructed, undersized or improperly installed underground system. Effective drainage requires the surface and subsurface components to function together.
HMA’s grading and paving experience adds practical value to drainage construction. The team understands how structure elevations, pavement slopes, curbs, walks and tie-ins affect the finished result.
Correcting drainage problems
Ponding water, settlement around structures, recurring pavement failures and saturated subbase may indicate drainage or grading issues. The proper correction depends on the cause. Solutions can range from adjusting grades or structures to installing new collection and conveyance systems or rebuilding affected pavement.
HMA works from project plans and engineering direction and communicates field conditions that may affect the proposed solution. Drainage design and permitting remain the responsibility of the appropriate licensed design professionals and authorities.
Construction at active properties
Drainage improvements often occur within existing parking lots, roadways or campuses. The work may require excavation through pavement, temporary access changes, trench protection, utility coordination and staged restoration.
HMA plans the sequence around safety, facility access and the need to protect completed work while the system and pavement are restored.
Frequently Asked Questions
Does HMA design stormwater systems?
HMA is a construction contractor. Drainage systems should be designed and approved by the appropriate licensed professionals and authorities. HMA builds the work within its contract scope and communicates relevant field conditions.
Can HMA repair pavement after drainage installation?
Yes. HMA’s paving capability can provide coordinated pavement restoration following drainage work.
What causes water to pond in a parking lot?
Possible causes include inadequate surface slope, settlement, blocked or damaged structures, limited outlet capacity or changes elsewhere on the site. The cause should be evaluated before selecting a repair.
Can drainage work be completed in phases?
Often it can, depending on system function, trench locations, facility access and the engineering requirements.
Planning a drainage or stormwater construction project?
Share the civil plans and known site concerns with HMA so our team can evaluate the construction scope.
